Cars  · 20 models

GaragePro coverage for Vauxhall

We hold 13 control units against Vauxhall at make level, which means they apply to every Vauxhall in the lists below. One special function is recorded for the make, and it is on Advanced only.

Coverage for Vauxhall is recorded at make level only — we hold no rows against an individual Vauxhall model. Read this as the brand-level answer and run the check with your year, which applies the year scopes the rows carry.

Covered by the Vauxhall make-level record

These Vauxhall models are in the vehicle database and resolve to the 13 control units above. We have not recorded rows against them individually, so read the counts as the brand-level answer.

  • Adam
  • Agila
  • Ampera
  • Antara
  • Astra
  • Astra GTC
  • Astra mk3
  • Astra mk4
  • Corsa
  • Crossland X
  • Insignia
  • Meriva
  • Meriva Estate
  • Mokka
  • Movano
  • Vectra
  • Vectra GTS
  • Vivaro
  • VX220
  • Zafira

Control units we read

The 13 units below are read on Vauxhall vehicles, and faults clear on all of them, on every plan.

  • ABS
  • ABS+EBCM
  • Airbag
  • BCM
  • Engine
  • EPS
  • HVAC
  • Immobilizer
  • Infotainment
  • Instrument Cluster
  • OBD2
  • SDC (Access control module)
  • Transmission

Special functions available

One function is recorded across the Vauxhall range. Included on Advanced only.

  • Injector Coding

Availability is per vehicle, not per make What your car exposes depends on its trim and model year — a variant with a cable handbrake has no electronic parking brake to retract. Run the check with your model and year for the list that applies to your vehicle.

Confirm your exact Vauxhall

This page is the make-level record. The check returns the unit list and function count for your model and year, which is the number that matters when you are choosing between plans.

Shop scanners

Check your vehicle before you buy

Result opens in place. Nothing navigates away.

Questions about this coverage

Will it read the airbag light?

If SRS or Airbag is in the control-unit list on this page, yes — it is read and faults on it clear, on every plan. The list above is the whole answer; nothing is held back for a higher plan.

Which plan do I need for a service reset?

Advanced. A service reset is a special function, and the special functions are Advanced-only regardless of make. Reading and clearing faults on every control unit is on every plan.

My model is not in the table above.

Then it runs on the make-level record, which is the list of control units at the top of this page. The table only names the models we have recorded rows against individually — it is not a list of what is supported.

Do I need a connector cable?

Cars use the standard 16-pin OBD-II port and need nothing extra. The extension cable is only for a port tucked behind trim where the scanner will not sit. Bikes are the exception — those need a make-specific cable, and it is on the bike product.