11 years in the Indian market
Read every fault code your dealer can. On your phone.
A dealer scan tool costs upward of ₹1.5 lakh. GaragePro starts at ₹3,499 and reads the same control units.
Plugs into the OBD port. Runs on the phone already in your hand.
No laptop, no subscription to a dealer network, no appointment.
Full system scan
Scan complete · 2.4s
- Engine ECM P0301 · P0171 2 faults found
- ABS ABS Clean
- Airbags (SRS) SRS Clean
- Power steering EPS Clean
- Body control BCM B1318 1 fault found
RESULT
3
stored faults across 2 of 5 units
- Engine P0301 · P0171
- Body control B1318
5 control units read in 2.4 seconds · 3 stored faults across 2 units
Check your own vehicleWhich scanner do you need?
Four vehicle classes. Pick the one you work on.
CarsFrom ₹3,499Every module, not just engineLite, Standard or AdvancedThousands of models in the coverage recordSee options
BikesMake-specific connector cable in the boxSingle make or every brandSame app, same fault descriptionsSee options
3-WheelersFrom ₹9,999Full scanning, not engine-onlyUnlimited scans and clearsBuilt for a fleet, not one vehicleSee options
HCV (24V)From ₹19,99924-volt commercial vehiclesHCV, or HCV with LCV or carSpecial functions includedSee options
See it work
Watch one fault, start to finish
A real car in a real garage: plug in, read the code, clear it, verify the light is out. Sound off is fine — it's subtitled.
What it actually reads
Every control unit on the vehicle, not just the engine.
The nine diagnostic modes
- Mode 01 Live sensor data while the engine runs
- Mode 02 Freeze frame — conditions when the fault occurred
- Mode 03 Stored fault codes
- Mode 04 Clear codes and reset the check-engine light
- Mode 05 Oxygen sensor test results
- Mode 06 On-board monitoring test results
- Mode 07 Pending codes from the current drive cycle
- Mode 09 Vehicle identification and calibration IDs
- Mode 0A Permanent codes that only a repair clears
How it compares
| How it compares | GaragePro | Generic ELM327 clone | Launch / ThinkDiag | Dealer visit |
|---|---|---|---|---|
| Price | ₹2,999 – ₹44,999 | ₹500 – ₹1,500 | ₹15,000 – ₹35,000 | ₹1,500 – ₹3,000 per visit |
| Modules read | Engine, ABS, SRS, EPS, BCM and more | Engine only | All modules | All modules |
| Fault code clearing | Unlimited, every module | Engine codes only | Unlimited | Per visit |
| Special functions | Included on Advanced | None | Varies by licence | Yes |
| Indian vehicle coverage | 2,000+ models, built in India | Generic OBD-II | Partial | One make only |
| Language support | 19, including Hindi, Tamil, Telugu, Malayalam and Kannada | English | English | — |
| Updates | Included | None | Paid annually | — |
| Support | Phone and WhatsApp, IST hours | None | Via distributor | Service desk |
| Warranty | 1-year replacement | None | 1 year | — |
How it works
Under the dash on the driver side. The extension cable reaches ports tucked behind trim.
Open the GaragePro app and pair. No cable to the phone, no Wi-Fi needed in the bay.
The code card ships in the box. It pairs the device to your plan — keep it.
Every control unit, plain-English fault descriptions, and a clear when the repair is done.
Car owner
Scan before the mechanic tells you
Know the fault code, and roughly what it costs, before you hand over the keys.
Shop personal plansGarage / professional
Unlimited scans, special functions, multi-vehicle
One tool across every car that comes through the bay, with the resets that finish the job.
For garagesIf something goes wrong
1-year replacement warranty
Faulty unit replaced, not repaired. One year from delivery.
7-day returns
Unopened or faulty, returned within seven days of delivery.
Phone and WhatsApp support
Monday to Saturday, 10 AM – 7 PM IST, on one number.
GST invoice
GSTIN on the invoice, issued on request with every order.
Activation code in the box
Ships with the device. Support activates it with you if needed.
+91 73530 07699 ·fix@carpm.in · Mon–Sat, 10 AM – 7 PM IST
Questions
Will it work on my car?
Check the make, model and year in the hero above. The answer comes from the GaragePro coverage record, and it says whether it is confirmed for the make or for your specific model.
Is this the same as a cheap ELM327 clone?
No. A clone reads engine codes only. GaragePro reads every control unit on the vehicle — ABS, airbags, power steering, body control and the rest — and clears faults on all of them.
Do I need a subscription?
Each plan is sold with its own validity options. What is on offer for a given plan is shown on that product page, read from the live catalogue.
What if my car is older?
Vehicles built before the OBD-II mandate in this market have no diagnostic port for the scanner to talk to. The compatibility check flags that for your exact year rather than letting you find out after delivery.
Can I use it on more than one vehicle?
Lite covers two vehicles that you pick in the app. Standard and Advanced cover every vehicle.
What are special functions?
The resets and calibrations that finish a repair — service reset, electronic parking brake retract, DPF regeneration, throttle adaptation and more. They are on Advanced only, and the compatibility check returns the count for your vehicle.
Does it need internet in the workshop?
The scan runs over Bluetooth. Internet is needed only for activation and for updates.
How long does delivery take?
Dispatched within 24 hrs. Delivery time depends on where you are — the shipping policy has the detail.
What GaragePro does not do
No ECU programming. No key coding. If your job needs either of those, this is not the tool — and we would rather tell you now than process a return.