Cars  · 16 models

GaragePro coverage for Proton

We hold 9 control units against Proton at make level, which means they apply to every Proton in the lists below.

Coverage for Proton is recorded at make level only — we hold no rows against an individual Proton model. Read this as the brand-level answer and run the check with your year, which applies the year scopes the rows carry.

Covered by the Proton make-level record

These Proton models are in the vehicle database and resolve to the 9 control units above. We have not recorded rows against them individually, so read the counts as the brand-level answer.

  • Ertiga
  • Exora
  • Exora Bold & Prime
  • Exora Star FLX
  • Gen-2
  • Iriz
  • Neo R3
  • Perdana
  • Persona
  • Persona Elegance
  • Preve
  • Saga
  • Saga FLX
  • Savvy
  • Suprima S
  • X70

Control units we read

The 9 units below are read on Proton vehicles, and faults clear on all of them, on every plan.

  • ABS
  • Airbag
  • BCM
  • Engine
  • EPS
  • Immobilizer
  • Immobilizer/BCM
  • Meter
  • Transmission

Special functions available

No special functions are recorded against Proton at make level yet. Every plan still reads and clears the control units above; Advanced adds nothing here until we record functions for this make.

Availability is per vehicle, not per make What your car exposes depends on its trim and model year — a variant with a cable handbrake has no electronic parking brake to retract. Run the check with your model and year for the list that applies to your vehicle.

Confirm your exact Proton

This page is the make-level record. The check returns the unit list and function count for your model and year, which is the number that matters when you are choosing between plans.

Shop scanners

Check your vehicle before you buy

Result opens in place. Nothing navigates away.

Questions about this coverage

Will it read the airbag light?

If SRS or Airbag is in the control-unit list on this page, yes — it is read and faults on it clear, on every plan. The list above is the whole answer; nothing is held back for a higher plan.

Which plan do I need for a service reset?

Advanced. A service reset is a special function, and the special functions are Advanced-only regardless of make. Reading and clearing faults on every control unit is on every plan.

My model is not in the table above.

Then it runs on the make-level record, which is the list of control units at the top of this page. The table only names the models we have recorded rows against individually — it is not a list of what is supported.

Do I need a connector cable?

Cars use the standard 16-pin OBD-II port and need nothing extra. The extension cable is only for a port tucked behind trim where the scanner will not sit. Bikes are the exception — those need a make-specific cable, and it is on the bike product.